The 612 Track Crank is an extremely stiff and strong 144mm BCD track crank. It’s at home as much on the busy avenues of your city as it is on the boards of the velodrome. All-City sweats the details, so the 612 (Minneapolis’ area code) is cold-forged, resulting in a tight grain structure. The upshot is that it’s strong, which means more riding and less worries for you. It utilizes the classic JIS square taper spindle and comes with a color-matched, 46-tooth, 1/8th chainring. - Recommended Spindle Length: 110mm - Spindle Interface Type: square taper JIS - Bolt Pattern: 5-bolt - BCD: 144mm - Chain Compatibility: 1/2-inch x 1/8-inch - Weight: 726g w/ ring and bolts - Bottom bracket and retaining bolts not included
Many top features are packed into the Centaur crankset. The four-arm design allows for independent bolt circles, offering greater stiffness and structural integrity, and also provides additional versatility, as a single crankset is compatible with both standard compact and semi-compact chainrings. Add these features to the first aluminium crankset with an Ultra-Torque axle and the result is a component that is very similar to the top-of-the range part. - Requires use of Ultra-Torque bottom bracket cups-Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - Ultra-Torque system have both drive and non-drive side bearings pre-installed
Campagnolo's Potenza offers the same race-winning shifting performance as its carbon fiber counterparts seen atop professional riders' bikes. Only slight changes in the material used in its construction differentiates Potenza. Its 4-arm spider features a unified bolt pattern to make changing between compact and standard gearing as easy as changing 8 bolts and two chainrings. This design incorporates an asymmetrically optimized bolt pattern with a spider arm that not only holds the chainring in place by way of the bolt, but also supports the chainring to increase system rigidity. And, the crank arms and spider are hollow for maximum stiffness with minimal weight. - Spindle/BB type: Campagnolo Power Torque - Spindle diameter: 25mm - Weight: 754g
The Campagnolo EKAR Crankset is a lightweight and efficient 1x13-speed crank designed for gravel riding and racing. - The 2-piece crank features a strong and durable 630-grade steel alloy crank axle mated to a lightweight carbon fiber spider and unidirectional carbon fiber arm - Must be used with a Campagnolo Pro-Tech bottom bracket - Chainring features a narrow-wide tooth design for efficient drive and maximum chain security - Easy access to external crank bearings - Easily interchangeable alloy rings – no need to disassemble the crankset - Narrow Q-factor – 145.5mm Specifications: - Number of Chainrings: Single - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 123 - Pedal Spindle: 9/16" - Drivetrain Speeds: 13
The Campagnolo Chorus 12-Speed Crankset features lightweight carbon crank arms, and is optimized for Campagnolo's Ultra-Torque crank system. - Utilizes Campagnolo's Ultra-Torque crank system to provide a very lightweight and stiff system that transfers power to the pedals without power loss - Directly molded unidirectional carbon fiber cranks, steel axle, and aluminum chainrings provide exceptional stiffness and optimum power transmission - Symmetrical teeth on the internal chainring allow for fluid and precise transmission, even with extreme cross-chaining - Chainrings are surface-treated for longer life - Q-Factor: 145.5mm - Design is optimized to run multiple chainring combinations - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 96 - Pedal Spindle: 9/16" - Crank Intended Use: Road - Drivetrain Speeds: 12 - BB Included: No - Weight: 686
The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics. The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
Designed specifically for use with H11 groupsets. Full Carbon crank arms and spider are hollow for maximum stiffness and minimal weight. Utilizes USB ceramic ball bearings. Light weight hard anodized alloy chainrings and alloy chainring bolts. Utilizes Campagnolo's Ultra-Torque crank system. - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - USB ceramic bearings increase smoothness and decrease rolling resistance, weight and the need for maintenance. USB bearings are 50% smoother than standard Campagnolo bearings - Ultra-Torque system have both drive and non-drive side bearings pre-installed - Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Required for use with H11 Ergopower shift levers, the crank spider is shifted outward to adjust for 135 and 142mm hub spacing while maintaining the Q-Factor - Requires use of Ultra-Torque bottom bracket cups
The road steepens, but instead of slowing down, you push harder on the pedals and fly up the hill as all of your power turns into speed thanks to your Campagnolo Super Record Ultra-Torque Crankset. It sports a unique, integrated titanium spindle design that joins the two sides of the crankset together via a toothed Hirth joint in the center. And for ultra-smooth pedaling, the crankset comes with ceramic bottom-bracket bearings that fit into outboard cups (sold separately). The aesthetically arresting design provides incredible stiffness, while Campagnolo's unified BCD (145/112mm) allows for all 3 chainring standards. Plus, the Super Record chainrings sport special pins and plating for fast, silent shifts and long life. - Chainrings included: Yes - Drivetrain speeds: 11 - Number of chainrings: Double - Spindle interface type: Campagnolo Ultra-Torque
The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
The Cane Creek crank preloader is designed to replace the plastic preload on your current crankset. Preloader is equipped with an aluminum preload ring, an aluminum inner thread ring, and a titanium 2.5mm hex fastening bolt. - 7075 Aluminum thread ring - 7075 Aluminum preload spacer adjuster - Grade 5 Titanium 2.5mm hex fastening bolt - Fits Raceface 30mm spindles, SRAM 30mm spindles, and SRAM 28.99mm DUB spindles
These spiders are optimized to fit Cane Creek's eeWings All-Road cranks, adding more versatility for riders. The spiders will allow direct-mount cranks, such as the eeWings, to accommodate 110 BCD chainring so riders can expand their gearing options. - Allows riders to run more 1x chainring options - CNC high grade 7075 series aluminum with black anodized finish - 50g
The eeWings Mountain titanium cranks were designed to keep up with the rigorous demands of the most aggressive trail and enduro mountain bikers—though they will benefit any rider who puts a premium on durability, stiffness and weight. - Ultimate in stiffness and durability while only weighing a mere 400 grams—in the same weight range as premium carbon cranks, but 20% to 30% stiffer - CNC aluminum BB preload adjustment ring included - Fitment compatibility across multiple frame standards, bottom bracket sold separately - 176mm Q-Factor - 30mm spindle is compatible with the following bottom brackets: BSA73mm, PF92/89.5, BB30 (External Bearing Only), PF30 (External Bearing Only), and 392EVO - Backed with a 10-year limited warranty
Dimension Cruiser one-piece hot-forged chromoly steel cranks. - One-piece, hot-forged chromoly steel crank - Cruiser chainwheels sold separately - Requires 24 tpi American bottom bracket - Crankset has 1/2-inch pedal threading
Dimension Cyclocross Arm Sets made of 6061-T6 aluminum. - Forged AL-6061-T6 - BB Not Included - Chainrings Not Included - 110/74 BCD - Drivetrain Speeds: 10, 9, 8 - Number of Chainrings: Double - Pedal Spindle: 9/16-inch - Spindle interface Type: Square Taper JIS - Weight: 590g
- Chainring bolts for double cranks - Torx heads
Replacement crank spindle for Easton EC90 SL cranks
The Easton Spider and Ring assembly features the Cinch Direct Mount System, making a swap between ring configurations a fast and simple procedure. This system also provides a significant weight savings by eliminating the material overlap and extra bolt hardware that is required for a traditional spider with chainring configuration. - EA90 Aluminum
Easton spider and ring assemblies for CINCH cranks.
The EC90 SL crank utilizes the Race Face CINCH technology, which allows for direct mount 1x rings as well as direct mount 2x spiders, and industry-leading versatility. Increasingly popular 1x setups have many advantages including weight and simplicity. Their major limitation is adaptability. A Cyclocross rider's ability to ride a course, then effortlessly change chainrings to their preferred setup is a major necessity that has, until now, been overlooked. Easton refines the design for larger ring applications with improved chain retention while reducing running noise and friction. Arms come assembled with spindle. Rings and BB sold separately. - EC90 SL carbon arms feature hollow carbon construction, while the spindle and pedal inserts features high-grade aluminum - CINCH direct mount technology is compatible with both 1x and 2x setups - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS BB tool for removal and installation - Chainline: 1x 47mm / 2x 45mm - Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay, 135/142 Road Disc Hubs < 415 mm Chainstay - 30mm spindle - BB Options: BB86, BSA 68mm, PF30 68mm, BB30 68mm, BBright, 386Evo - Bottom bracket and chainrings sold separately
- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles
FSA die cast alloy crank arms for Bosh Gen3 systems. - Bosch Spindle Interface (BNI) - Great way to shed weight over stock steel arms - Subtle graphics - Sleek Styling
FSA ISIS eBike replacement crankarms.
$28.99 - $29.99
FSA JIS Square Taper eBike replacement crankarms. Note: Spindle bore orientation varies with crank arm length - 155mm arms have diamond spindle bore orientation with sides at 45° angles to the crank arm - 170 & 175mm arms have square spindle bore orientation with sides parallel to the crank arm
FSA Shimano STEPS eBike replacement crankarms.
$42.99 - $46.99
FSA BROSE eBike replacement crankarms.
- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options
True value and performance are found in the FSA Tempo Adventure crankset. The cranks are built to serve the recreational rider well and enhance riding enjoyment. - Crank arm and spider feature monocoque construction - Die-cast aluminum crank arms are lightweight and durable - AL7075 stamped and CNC-machined outer chainring - Heat-treated chromoly inner chainring - Chromoly chainring bolts - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs - Crank Length: 170mm - Crank Intended Use: Road, Gravel - Pedal Spindle: 9/16" - Rings: 46/30 - Spindle Interface Type: Square Taper JIS - Drivetrain Speeds: 11 - Chainring BCD: 110 - BB Included: No
The Omega crankset is where fashion meets function, combining sleek styling with robust industrial design elements. Updated 11-speed compatibility puts the latest shifting technology into an attractive, price-conscious crankset. - Die-cast aluminum crank arms are lightweight and durable - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Number of Chainrings: Double - Pedal Spindle: 9/16" - Chainline/Hub Compatibility: 130 Hubs - Rings: 50/34 - Spindle Interface Type: FSA MegaExo 19 - Chainring BCD: 120, 90 - Bottom Bracket Included: No
To be in sync on a tandem is the essence of the experience. FSA's Gossamer tandem cranksets keep your timing perfect, and keeps the power going to the rear wheel where it belongs. The communication and balance? That's up to you and your partner. - Shimano and SRAM 10-Speed compatible
- Cold forged AL6061/T6 aluminum crank arms - Forged AL7050 BB386EVO spindle - AL7075 100% CNC chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems
Page 1 of 7 Next page